Below is a list of projects that Equinox India has completed.

Clients include:

  • Equinox Engineering Ltd., Calgary, AB, Canada
  • Vatech-Wabag Ltd., India
  • Equinox Engineering Australia, Brisbane, QLD, Australia
  • Atlas Copco India Ltd.
  • Toyo Engineering India Ltd.
  • Airoil Flare Gas Ltd., India
  • Aker Solutions Ltd., India
  • Tata Motors Ltd., India
  • Thermax Ltd., India
 

 

 

Kiunga Condensate Loading Terminal

For Equinox Engineering Ltd

Project Summary: In Papua New Guinea, design of condensate storage and shipping terminal including a 75,000 bbl floating roof Condensate Storage Tank, two centrifugal condensate loading pumps, and diesel power generators and a river loading facility along the Fly River for loading condensate into river-going tankers. Pipelines include 6″ x 40km, 12″ x 1.5 km.

Scope: Preparation of 3D model in Bentley Autoplant, stress analysis of critical lines and 2D drawings (all engineering disciplines), Stress Analysis of critical pipe lines for the 75,000 bbl terminal.

 

          q34523
 

Stanley Gas Plant

For Equinox Engineering Ltd

Project Summary: In Papua New Guinea, CONCEPT SELECT and DETAIL DESIGN for 140 MMscfd gas plant and 5200 bpd liquids recovery facility. Gas Plant includes inlet separation, re-injection compression (4 RECIPROCATING compressors totalling 13,720 hp), Mercury removal, refrigeration, condensate stabilization (5200 bpd), power generation and condensate storage (25,000 bbl)

Scope: Preparation of 3D model in Bentley Autoplant, stress analysis of critical lines and 2D drawings (all engineering disciplines).

 

          567432

 

 

 

Bitumen Pilot Plant (Thermal Assisted Gravity Drainage)

For Equinox Engineering Ltd

Project Summary: FEED for a 3,800 bpd Bitumen Pilot Plant utilizing the TAGD process (using electrical conductive heating to mobilize the bitumen within the carbonate formation).

Scope: Preparation of 3D model in Bentley Autoplant (all engineering disciplines) for 2 multiwell pads and 12” emulsion, 4” annulus gas and 3” fuel gas flowlines.

 

          q34523
 

Sour Gas Amine Sweetening Plant

For Equinox Engineering Ltd

Project Summary: Detailed Design for the Inlet Gas Sweetening expansion of the Phase 2 Musreau Gas Plant which includes the design and installation of an Amine Plant sized for 203 MMscfd of raw inlet gas with 1% H2S and 1% CO2.

Scope: Preparation of 3D model in Bentley Autoplant (all engineering disciplines) and 2D drawings (all engineering disciplines), Stress Analysis of critical pipe lines.

amine3
 

Gas Processing & Turbo Expander Facility

For Equinox Engineering Ltd

Project Summary: FEED and Detail Design for a 200 MMscfd sour gas plant containing inlet separation, inlet compression (3 reciprocating compressors totaling 14,205 hp), mole sieve dehydration, a turbo expander liquid recovery package (17,697 bbl C2+), sales compression (2 centrifugal compressors totaling 26,440 hp), C2+ storage, condensate stabilization (5,896 bbl), LACT and power generation (11.2 MW).

Scope: Preparation of 2D drawings

234322566777
 

Thermal Heavy Oil Central Processing Facility

Sustaining Capital Projects

Project Summary: Sustaining Capital projects and Management of Change projects within a 100,000 bpd SAGD Central Processing Facility in Northern Canada

Scope: Preparation of 2D drawings.

q34523
 

Lower Fars Oil Pilot Project

Kuwait Oil Company

Project Summary: Design of central processing facility, wellpads and pipelines for a 9,000 bpd Cyclic Steam Stimulation (CSS) Pilot Plant in Ratqa field in northern Kuwait.

Scope: Preparation of 3D model in Bentley Autoplant (all engineering disciplines) and 2D drawings (all engineering disciplines), Stress Analysis of critical pipe lines.

q34523
 

Kerosine Treatment Plant, IOCL Paradip Refinery India for Aker Solutions Ltd., India

Project Summary: To provide detail engineering services support for refinery expansion work at Paradip, located in north-east part of India.

Scope: Preparation of a 3D model in PDMS software and preparation of ISO’s, Piping Stress Analysis as well as Bills of Material

e5w4rrfrw
 

Volvoline Lube Oil Blending Unit for Aker Solutions Ltd., India

Project Summary: To provide detail engineering services support for new plant located at Ambarnath, western part of India. The project consists of blending of base oil used in conventional motor oil coming from a natural source with additives.

Scope: Preparation of a 3D model in PDMS software as well as preparation of GA drawings, ISO’s, Piping Stress Analysis, Pipe Support Sketches and Bills of Material.

q34523
 

Lanco Boiler House for Thermax Ltd., India

Project Summary: To provide detail engineering services support for waste heat recovery boiler (HRSG) boosting efficiency from 35% to 40 % range in simple cycle (also known as open cycle) mode to 55% to 60% range in combined cycle mode. The steam generated by HRSG can be used for generating electricity in a steam turbine, for process heating for both i.e. combined heat and power. The plant is located in Kondapalli, southern part of India.

Scope: Preparation of 3D model in PDMS software and preparation of ISO’s, Piping Stress Analysis and Bills of Material

q34523
 

Jurong  Aromatics Complex for Atlas Copco India Ltd.

Project Summary: To provide detail engineering services support for expansion work Compressor House which provide a Plant Air & instrument Air to the Plant for Jurong’s Singapore unit.

Scope: Generation of ISO’s, Wall Thickness Calculations and Pipe Stress Analysis.

q34523
 

Diesel Hydro Treating Plant

Hindustan Petroleum Corp Ltd

Project Summary: To provide detail engineering design of a 4.5 km pipe rack, which includes 16 different fluid services for HPCL plant located in Vishakhapatnam, southern part of India.

Scope: Preparation of all engineering discipline 2D drawings, design calculations, Pipe Stress Analysis, As-built drawings.

5643543
 

Korba Thermal Power Generation Plant / Condensate Polishing Unit for Vatech-Wabag Ltd., India

Project Summary: This is part of expansion of the existing water treatment facility for Korba plant located at north-east India. Condensate polishing system uses the boiling and condensing of water to transport or transform thermal energy.

Scope: Preparation of Pipe Support Layouts.

image-pending-white
 

Mangalore Petrochemicals Ltd. for Airoil Flare Gas Ltd., India

Project Summary: To provide detail engineering services support to NOCL refinery project work at Mangalore.

Scope: Preparation of Pipe Support Layouts and Rack Load Calculations as well as performing a Pipe Stress Analysis.

image-pending-white
 

Nagarjuna Oil Corporation Ltd. for Airoil Flare Gas Ltd., India

Project Summary: To provide detail engineering services support for NOCL refinery project work at Cuddalore, located in southern part of India.

Scope: Preparation of Pipe Support Drawings and performance of a Pipe Stress Analysis of pipelines connected to a Flare Stack

image-pending-white
 

Tata Steel Ltd. for Airoil Flare Gas Ltd., India

Project Summary: To provide detail engineering services support for new Boiler house facility at Bhubaneshwar, north-east part of India.

Scope: Preparation of Pipe Support Drawings and performance of a Pipe Stress Analysis of pipelines connected to a self- supported Flare Stack.

image-pending-white
 

Cosmetic Plant, L’Oreal India for Aker Solutions Ltd., India

Project Summary: To provide detail engineering services support for phase-III expansion work for plant located in Pune.

Scope: Preparation of GA drawings, ISO’s as well as Bills of Material

image-pending-white
 

Unilever Srilanka – Toothpaste, Cream Lotion and Soap Plant, Unilever Srilanka for Aker Solutions Ltd., India

Project Summary: To provide detail engineering services support for new manufacturing plant having 3 different areas for Cream Lotion unit, Soap Plant & Toothpaste plant. The site is located in Srilanka.

Scope: Preparation of ISO’s as well as Bills of Material.

image-pending-white